LOCKPICK USB UPDATE

UNLOCK YOUR RADIO AND NAV SCREEN

As seen in CAR AND DRIVER, 12VOLT, MOBILE ELECTRONIC MAGAZINES AND CE OUTLOOK

 

 

HOME
LATEST NEWS
MYGIG AIR
UCONNECT AIR V1
UCONNECT AIR V2
MYTOUCH AIR
FORD LOCKPICKS
CHRYSLER LOCKPICKS
GM LOCKPICKS
USB UPDATES
POLICIES

 

 

 

Live chat by Boldchat
 

 

 

   

 Welcome to the Coastaletech USB Maintenance page.

Our new Lockpick Pro modules include the ability for the user to perform
software updates with a simple laptop connection.

        
WARNING: DO NOT UPDATE YOUR LOCKPICK UNLESS INSTRUCTED BY A COASTALETECH SUPPORT TECHNICIAN

FREEDOM IN MOTION MODULE
USB MAINTENANCE APPLICATIONS
FIM MYGIG V5
FIM REC NEW GENERATION
FIM MYGIG ADAPTER NEW GENERATION
FIM SYNC-LP1 NEW GENERATION
FIM GEN6 NEW GENERATION
FIM CTS NEW GENERATION
FIM C8 NEW GENERATION
FIM GM GEN2 

. From time to time vehicles and factory software may change, requiring software updates to our products. The USB Maintenance port on your Lockpick module provides a means to keep your module current and to take advantage of improvements we may create for your product. Software updates are listed and available for download below.

To update your FREEDOM IN MOTION Lockpick module (shown above),
first download the Firmware Updater program at the link below.

Lastest FIRMWARE UPDATER program
is available for download at this link

 

NEXT, download the latest software for the new FREEDOM IN MOTION modules at the link below.

Latest software download available here
for FREEDOM IN MOTION LOCKPICKS

NOTE: Must use the FIRMWARE UPDATER above to install this
program in your FREEDOM IN MOTION LOCKPICK (pictured at top of page)
The update will not work in earlier model Lockpicks and could cause them not to operate.

Unzip the FIRMWARE UPDATER file and select the FIRMWARE UPDATER SETUP icon to install the program to your WIndows computer. Install the USB driver included in the download when prompted by the FIRMWARE UPDATER and then continue the installation as directed by the on screen instructions - it's easy

      With the Lockpick module connected to your vehicle for power, and the key out, plug in a USB cable to the USB port on your computer and to the USB port on the Lockpick module. Your computer will display a "found new hardware" message and a few seconds later report that the new hardware is ready to use. Wait until your computer says that the new hardware is ready to use.


    Next, start the FIRMWARE UPDATER program and when prompted, browse to the location you saved the latest software update from the download above.  Follow the on screen program instructions and a few minutes later, your Lockpick will be equipped with the latest changes and upgrades.

.....................................................................................

  NOTE: Chrysler Dodge Jeep Products

Note: The radio auto-dimming function is not affected by the installation of the MYGIG AIR or MYGIG PRO Lockpick. If you set your instrument panel dash display (speedometer etc.) to maximum brightness using the variable adjustment present near the headlight switch or on the steering wheel stalk (the wheel has a click detent position), you have turned off the auto-dimming. While turned off, the radio will not switch to night mode or dim when the headlights are activated. Move the adjustment out of the maximum brightness detent to return auto-dimming back to on.

 

New UCONNECT AIR V1 or V2 LOCKPICK download available below:

To update your Uconnect Air Lockpick  module,
first download the Firmware Updater program at the link below.

Lastest FIRMWARE UPDATER program
is available for download at this link

NEXT, download the latest software for the new UCONNECT AIR V1 or V2 module at the link below.

Latest software download available here
for the Uconnect LOCKPICK AIR V1 or V2

 

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Unzip the FIRMWARE UPDATER file and select the FIRMWARE UPDATER SETUP icon to install the program to your WIndows computer. Install the USB driver included in the download when prompted by the FIRMWARE UPDATER and then continue the installation as directed by the on screen instructions - it's easy

With the Lockpick module connected to your vehicle for power, and the key out, plug in a USB cable to the USB port on your computer and to the USB port on the Lockpick module. Your computer will display a "found new hardware" message and a few seconds later report that the new hardware is ready to use. Wait until your computer says that the new hardware is ready to use.

    Next, start the FIRMWARE UPDATER program and when prompted, browse to the location you saved the latest software update from the download above.  Follow the on screen program instructions and a few minutes later, your Lockpick will be equipped with the latest changes and upgrades.

.....................................................................................

New GMX AIR LOCKPICK download available below:

To update your GMX AIR Lockpick  module,
first download the Firmware Updater program at the link below.

Lastest FIRMWARE UPDATER program
is available for download at this link

NEXT, download the latest software for the new GMX AIR module at the link below.

Latest software download available here
for the GMX AIR LOCKPICK

 

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Unzip the FIRMWARE UPDATER file and select the FIRMWARE UPDATER SETUP icon to install the program to your WIndows computer. Install the USB driver included in the download when prompted by the FIRMWARE UPDATER and then continue the installation as directed by the on screen instructions - it's easy

With the Lockpick module connected to your vehicle for power, and the key out, plug in a USB cable to the USB port on your computer and to the USB port on the Lockpick module. Your computer will display a "found new hardware" message and a few seconds later report that the new hardware is ready to use. Wait until your computer says that the new hardware is ready to use.

    Next, start the FIRMWARE UPDATER program and when prompted, browse to the location you saved the latest software update from the download above.  Follow the on screen program instructions and a few minutes later, your Lockpick will be equipped with the latest changes and upgrades.

.....................................................................................

 

   New FORD/LINCOLN MYTOUCH LOCKPICK download available below

To update your FORD LINCOLN MYTOUCH Lockpick module,
first download the Firmware Updater program at the link below.

Lastest FIRMWARE UPDATER program
for the MYTOUCH Lockpick is available for download at this link

NEXT, download the latest software for the new FORD LINCOLN MYTOUCH module at the link below.

Latest software download available here
for the FORD/LINCOLN MYTOUCH LOCKPICK


NOTE: Must use the MYTOUCH FIRMWARE UPDATER above to install this
program in your MYTOUCH LOCKPICK
The update will not work in earlier model Lockpicks and could cause them not to operate.

Unzip the FIRMWARE UPDATER file and select the FIRMWARE UPDATER SETUP icon to install the program to your WIndows computer. Install the USB driver included in the download when prompted by the FIRMWARE UPDATER and then continue the installation as directed by the on screen instructions - it's easy

With the Lockpick MYTOUCH module connected to your vehicle for power, and the key out, plug in a USB cable to the USB port on your computer and to the USB port on the Lockpick module. Your computer will display a "found new hardware" message and a few seconds later report that the new hardware is ready to use. Wait until your computer says that the new hardware is ready to use.

    Next, start the FIRMWARE UPDATER program and when prompted, browse to the location you saved the latest software update from the download above.  Follow the on screen program instructions and a few minutes later, your Lockpick will be equipped with the latest changes and upgrades.

 

 

Coastal Electronic Technologies, Inc.

Ph(321)574-5011
support@coastaletech.com